Forklift Pocket Tank

forkpocket1The Forklift Pocket ISO Tank is designed for use in remote areas with limited lifting equipment, such as the Alaskan mining industry where only forklifts are available. At a height of 9 feet, this ISO container is certified under strict compliance, and meets most regulations from around the world.

STANDARD FEATURES
CAPACITY up to 25 CBM
MAXIMUM GROSS WEIGHT 36,000 KG
TARE WEIGHT up to 4,700 KG
WORKING PRESSURE 4 Bar 58 Psi
DESIGN TEMPERATURE -40C to 130C – 40F to 266F
MATERIAL DIN 17441 1,4401 (C < 0.03%), SANS 50028-7 1,4402, 1.4404 ASTM A240 SS316L (can be reduced to 304)
DESIGN CODE ASME VIII, Div.1 where applicable and IMDG T11, US Dot, CFR 49, ADR, RID, UTC, CTC, AAR, CSC, TIR, ISO
FITTINGS
MANLID 1×500mm dia low profile manlid
RELIEF VALVE 1×2.5” BSP Relief Valve (need 2 valves for Type T4)
AIR LINE 1×1.5” BSP Airline Ball Valve with cap
TOP DISCHARGE PROVISION 1×3” blanked provision for future fitting of a 3” butterfly with siphon tube
BOTTOM DISCHARGE ASSEMBLY 1×3” 45 deg High lift Style bottom discharge valve assembly (foot valve, butterfly and cap) with 3” Camlock Provision
STEAM HEATING 6 runs giving 8.5 m2 effective surface area, with 0.75” BSP inlet/outlet cap, Working Pressure at 4 Bar
INSULATION 50mm thick mineral wool with density of 50KG/m3 covered 1.8mm white GRP cladding
WALKWAY “F” Style Marine Grade Aluminum Q grating with ladder on the right
FORKLIFT POCKET ID 420×150 Saddle Style Corten Steel Forklift Pocket with side protection bar
OPTIONS
DISH-END FULL BAFFLE Japanese style FULL Dish-END baffle with cleaning port
EUROPEAN BOLTED BAFFLE Half Baffle

ISO Container With Fork Channels Technical Data Sheet